Power Supply Single Phase (Rish Flex 48024A )
The Rish Flex 48024A is a Power Supply of Single Phase.
Product Overview
The Rish Flex 48024A is a Power Supply of Single Phase.
The Rish Flex 48024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to
power demanding loads such as motors, solenoid valves,
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
input: single-phase: 115 – 230 Vac
Frequency: 47 – 63 Hz 6%
Output: 24 Vdc 60°C
Efficiency up to 92%
Strong overload without switch-off, up to 50%
Flexible Power continuity : from 384 to 480W
For more details please refer datasheet.
Technical Specifications
The Rish Flex 48024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to
power demanding loads such as motors, solenoid valves,
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
input: single-phase: 115 – 230 Vac
Frequency: 47 – 63 Hz 6%
Output: 24 Vdc 60°C
Efficiency up to 92%
Strong overload without switch-off, up to 50%
Flexible Power continuity : from 384 to 480W
For more details please refer datasheet.
Talk To Our Technical Experts
Related Products
Power Supply 1-Phase (Rish Flex 15048A )
The Rish Flex 15048A is a Power Supply of Single Phase.
Single Phase Power Supply (Rish Flex 9012A)
This is the default factory setting of all FLEX units. In case of short-circuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared.
Single Phase Power Supply (Rish Flex-e 17024A)
This features allows the use of a smaller size unit to power demanding loads such as motors, solenoid valves, lamps and other loads with transient overload behavior which would otherwise required an oversize power supply.
Multifunction Power Meter (RISH ML 1400 / ML 1410)
The RISH ML 1400 is a multifunction power meter that can monitor and measure electrical parameters. It has an accuracy class of 0.5 and can be used for Class 1 or Class 0.5s applications.